SkyWay - 轉自 Vodhin.net

下載遊戲的更新檔,或是商店、建築、裝飾等額外用品。

版主: RCT4

版面規則
  • 求檔前往 模擬樂園 3 教學
  • 先搜尋一下有否相同或重覆的下載。
  • 檔案盡量上傳至本討論區或是可靠的檔案寄存服務如 box.net
  • 不要發表侵犯著作權的下載。

SkyWay - 轉自 Vodhin.net

文章JOPHY » 2008-03-07, 10:31

圖檔

This "Ride" is designed to traverse level ground, but all pieces are set to remain in place if you teraform below them. It is possible to have the terminals at different heights, but you would need to raise/lower by incriments of 7 "Ride Height" units (7 Snaps).

Tutorial:

First - Pause the game, then place one of the Terminal Loops:
圖檔

To that, add the matching Terminal connection:
圖檔

Continue adding spans- either a slope to go higher or a level to go across:
圖檔

The Level sections cover only half the standard distance- use the rotate button (Z) to turn the Level section around and attach to the previous placing:
圖檔

Add a Terminal to each end- there are two types: 1 (with motor) & 2 (without). Use the terminal of the same ride type for propper speed and height of the parts:
圖檔

Add your towers. There are 3 standard sizes that are interchangeable between the different SkyWay themes, and more parts are available in the second menu: Vodhin's SkyWay Accessories
圖檔

You can raise the ground around the terminals and add a pathway so it looks like peeps are coming and going (Peeps DO NOT ride this set- it is scenery only).
圖檔

Several designs for the SkyWay base platforms are available. Chose your favorite and place so the edge of the sloping front is where the cars enter and exit.
圖檔

Any Span with "Slope 2" in it might look funny when you first place it, due to the steep angle of the cable.
圖檔

A special "Compression Train" part can be found in the SkyWay Kit Accessories to top the towers properly:
圖檔[ 本文章最後由 JOPHY 於 2008-3-7 10:36 編輯 ]
您沒有權限檢視這篇文章所附加的檔案。
JOPHY
 

Re: SkyWay - 轉自 Vodhin.net

文章RCT4 » 2008-03-07, 19:40

多謝分享,係咪全新架?
當初我仲以為係遊樂設施黎添,但里套景物非常好。相比起Atari同Frontier果D,里個就係大師級之作!
頭像
RCT4
火星會員
 
文章: 858
註冊時間: 2008-02-16, 22:12
來自: Hitachi

Re: SkyWay - 轉自 Vodhin.net

文章JOPHY » 2008-03-09, 18:31

RCT4 寫:多謝分享,係咪全新架?

   
   暫 時 係 囉 ...
   不 過 都 載 唔 到 人 ...
JOPHY
 

Re: SkyWay - 轉自 Vodhin.net

文章AR輝=] » 2008-03-11, 19:59

戴唔到人=0="?
AR輝=]
 

Re: SkyWay - 轉自 Vodhin.net

文章銘仔 » 2008-03-11, 20:18

E個係景物,而唔係戴人既遊玩設施(H)
頭像
銘仔
金星會員
 
文章: 3017
註冊時間: 2007-04-05, 20:36

Re: SkyWay - 轉自 Vodhin.net

文章SkyBread » 2008-03-12, 10:18

用呢睇下都唔錯...
SkyBread
 

Re: SkyWay - 轉自 Vodhin.net

文章AR輝=] » 2008-03-12, 17:17

我想問放係邊~_~??
AR輝=]
 

Re: SkyWay - 轉自 Vodhin.net

文章he16767 » 2008-04-18, 21:46

圖檔

This "Ride" is designed to traverse level ground, but all pieces are set to remain in place if you teraform below them. It is possible to have the terminals at different heights, but you would need to raise/lower by incriments of 7 "Ride Height" units (7 Snaps).

Tutorial:

First - Pause the game, then place one of the Terminal Loops:
圖檔

To that, add the matching Terminal connection:
圖檔

Continue adding spans- either a slope to go higher or a level to go across:
圖檔

The Level sections cover only half the standard distance- use the rotate button (Z) to turn the Level section around and attach to the previous placing:
圖檔

Add a Terminal to each end- there are two types: 1 (with motor) & 2 (without). Use the terminal of the same ride type for propper speed and height of the parts:
圖檔

Add your towers. There are 3 standard sizes that are interchangeable between the different SkyWay themes, and more parts are available in the second menu: Vodhin's SkyWay Accessories
圖檔

You can raise the ground around the terminals and add a pathway so it looks like peeps are coming and going (Peeps DO NOT ride this set- it is scenery only).
圖檔

Several designs for the SkyWay base platforms are available. Chose your favorite and place so the edge of the sloping front is where the cars enter and exit.
圖檔

Any Span with "Slope 2" in it might look funny when you first place it, due to the steep angle of the cable.
圖檔

A special "Compression Train" part can be found in the SkyWay Kit Accessories to top the towers properly:
圖檔

[ 本文章最後由 RCT4 於 2008-4-18 21:50 編輯 ]
圖檔
頭像
he16767
土星會員
 
文章: 171
註冊時間: 2008-03-29, 19:43
來自: 大埔墟運......

Re: SkyWay - 轉自 Vodhin.net

文章RCT4 » 2008-04-18, 21:48

Jophy之前已經post過個下載
頭像
RCT4
火星會員
 
文章: 858
註冊時間: 2008-02-16, 22:12
來自: Hitachi

Re: SkyWay - 轉自 Vodhin.net

文章bananasims » 2008-04-18, 21:50

不過唔坐得人 :(
影像.從心 At the heart of the ímage
bananasims
太陽會員
 
文章: 13541
註冊時間: 2005-09-22, 00:00

Re: SkyWay - 轉自 Vodhin.net

文章BennyChan » 2008-05-04, 11:53

又係no sid for svd,可吾可以教我點整阿?咩附件都吾得,係得Custom Scenery Cart得,我個陣時隨手試下先試到...

始終吾係幾明...可吾可以教我點整阿?
BennyChan
 

Re: SkyWay - 轉自 Vodhin.net

文章RCT4 » 2008-05-04, 12:25

試下里幾個方法,
http://bbs.i-circle.net/viewtopic.php?f=104&t=6691
都吾得我地都幫吾到你,
無可能吾得,
人地Atari Forum成幾千人用過,
又吾見有事?
頭像
RCT4
火星會員
 
文章: 858
註冊時間: 2008-02-16, 22:12
來自: Hitachi

Re: SkyWay - 轉自 Vodhin.net

文章BennyChan » 2008-05-04, 13:27

睇完套片後,我down 左Shy-Expo3000set.exe,unzip 後,係咪就得la?同埋之後我dl D 野係咪一味Unzip 個Zip file 就ok?
BennyChan
 

Re: SkyWay - 轉自 Vodhin.net

文章RCT4 » 2008-05-04, 19:27

照計,unzip應該無乜問題
頭像
RCT4
火星會員
 
文章: 858
註冊時間: 2008-02-16, 22:12
來自: Hitachi

Re: SkyWay - 轉自 Vodhin.net

文章JOPHY » 2008-05-04, 23:40

  
   其 實 係 咪 你 放 嘅 方 法 錯 咗 呢 ?
   例 如 :: Shy-Expo3000Set
   路 徑 應 該 係 圖檔
         圖檔
   而 你 放 嘅 方 式 就 Shy-Expo3000Set 裡 面 再 開 多 個 Shy-Expo3000Set Folder ?
JOPHY
 

Re: SkyWay - 轉自 Vodhin.net

文章BennyChan » 2008-05-07, 20:10

噢,係咪即係要將DL 左D野放係Shy-Expo3000Set Folder 到?
BennyChan
 

Re: SkyWay - 轉自 Vodhin.net

文章RCT4 » 2008-05-07, 21:00

其實,如果你用winrar,就咁extract入去style/themed就得,千其吾好再開folder
頭像
RCT4
火星會員
 
文章: 858
註冊時間: 2008-02-16, 22:12
來自: Hitachi


回到 [A3a] 模擬樂園 3 下載



誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 12 位訪客

cron